Elgin produced watches in Elgin, Illinois (a Chicago suburb), for over 100 years. They were the largest and most prolific of the American manufacturers and everything they turned their hand to was well-made and, as a testament to their prowess, there are many Elgins still ticking away today. This gentleman's Elgin is one of them - and what a handsome case and dial configuration it has. This handsome, rectangular case houses a very nice, 17 jewel movement that our head watchmaker has running like a top. The case is yellow gold-filled and it measures 27mm, by 8mm thick, by 37mm lug to lug. The case is in good shape, showing only minor wear. The two-tone silvered dial is very unusual because it is contrasted by a yellow chapter column, Roman numerals at the even chapters, a seconds bit that echos the case shape, and gold baton hands. There is a scratch at the 10 o'clock position but it is, after all, the original dial. It sports a snake grain band that completes the look. For a watch made circa 1947, it is a real winner for not much dough. Our one-year warranty for parts and labor will allow you to buy with confidence.
Gruen watches are top quality and this one is a cut above many of their other watches. Its unusual appearance is due to two factors. The slender profile and rose-colored dial combine to give a unique, Art Deco look to an easy-to-carry timepiece. It is also very thin for its era and, because of this, is classified as an "Opera Watch". This designation signified that it was easy to carry in a tuxedo vest while in attendance at the opera. It is a 15 jewel, Caliber 381 thoroughbred movement in a yellow gold-filled case with stylized gold hands and a seconds bit at the 6 o'clock position. The case measures 39mm in diameter by 51mm from the bottom of the case to the top of the bow by 8.5mm thick. It also sports an oblong bow and a great, original dial with gold applied numerals, circa 1939. This Gruen is very unusual and scarce and it can be yours. Fully restored and warrantied. Remember all of our timepieces come with our famous one-year warranty for parts and labor so that you may buy with confidence.
Omega is one of our favorite brands, having produced the high-quality timepieces that endure the test of time. Oversize Omegas, like this one, are very desirable and we constantly look for great examples for our customers who prefer this more 'modern' size. It was a model made for the South American market and, therefore, is a size rarely seen in North America where 34mm was frequently the largest size worn. This Omega "Jumbo" measures 38mm in diameter (not including the crown) by 44mm lug to lug, by 10mm thick (including the crystal). The thin profile means that while this watch has a great presence on the wrist, it also easily slips under a shirt cuff.
It sports an aged silvered dial that is still in great shape, despite showing some minor age spots. The "Omega" logo and name sits below the 12 o'clock position. The large seconds bit overlaps the "6" and takes up all the space in between the 6 o'clock position and the center of the dial--very large indeed! Its "record grooves" catch the light at different angles to the body of the dial, creating a two-tone effect. Rose gold painted Arabic numerals mark the even numbers, with arrow markers in the odd positions. Paired with the rose gold hands, the warmer tones are a nice contrast to the silvered dial.
The 15 jewel, manual wind movement is in great condition and is running like a top. Our head watchmaker has completely restored this beauty so that it is winding, setting, and keeping time just like it did back in the day, circa 1947. The stainless steel case assures you of many, many years of wear without looking worn. Why not own an interesting and historic Omega? It could be yours!
Elgin was the largest watch manufacturer in the world and when this solid gold Elgin multi-color hunter was made, circa 1918, in Elgin, Illinois and they were dominating the pocket watch market. Their popularity was due to the fact that they made a very reliable and accurate timepiece for a reasonable amount of money. This one is a 16 size, box hinge, that was carried traditionally by men, as it was the standard size for everyday use. The case is a 14k, solid gold, multi-color, box hinge, beauty that was the pinnacle of solid gold pocket watches. On the solid gold case lids you can see yellow gold, white gold, rose gold, and green gold in a fantastic foliate design on the front cover and a multi-color stag in the center of the back lid. With the addition of the classic white porcelain dial, it makes for a winning combination! The movement, which is as clean as a whistle, is a 3/4 plate, 17 jewel, nickel movement, an engineering marvel, that is running perfectly. The porcelain dial is in excellent condition and is a good contrast for the blued steel, spade-style hands. Also, take note of the bow. It is what we term a "stirrup" bow that was very desirable. The case measures 48mm in diameter, by 66mm top to bottom, by 12mm thick. Remember, all of our timepieces come with our one-year warranty for parts and labor, so that you may buy with confidence.
This is one of the "Art Deco" 17 jewel, open face Howards that was made circa 1924. It has an original box and papers that are from the era but, do not exactly match the serial number. My guess is that there were two watches purchased and the boxes got switched at some time in the past because the serial numbers are so close. Nevertheless, it is an original box with original papers. It is a 12 size (measuring 46mm in width by 59mm from the case bottom to the top of the bow), white gold filled, "Extra" case (the thickest gold filled case made) and the case condition is wonderful. Our head watchmaker has it winding, setting, and keeping time just as it did 100 years ago!
What really makes it sing, however, is the "Art Deco" silvered dial. It is just a thing of beauty that is doubly accented by the pierced, blued steel hands, the engraved pendant, the stylized numerals, and the unusual bow shape. This fabulous case contains a Series Seven that is in pristine condition. Howard has a sterling reputation for quality and this watch is no exception. We warranty all of our timepieces for one year, for parts and labor, so that you may buy with confidence. It can be yours.
Howard was the Rolls Royce of American pocket watches at the end of the 1800s and they were the standard by which all other companies were measured. The Boston based E. Howard & Co. introduced the first "quick beat" train to American watchmaking and were also the first company to produce, and market, a stem winding watch in the U.S. as well as the first to adjust timing to all 6 positions. Yes, they were an amazing company who led the American pocket watch onslaught with great panache. By 1902, Howard was purchased by the Keystone Watch Case Company and they carried on the great Howard tradition. Their watches were marked "E. Howard Watch Co. Boston U.S.A." All their watches were cased and timed at the factory and came as complete watches only, unlike the earlier Howard company who contracted with as many as 23 different companies to fabricate cases for them. The production was terminated in 1930 after having made only about 650,000 complete watches. If you compare this total with Elgin, who made roughly 55,000,000 over 100 years of production time, you can see why the Howard watch is scarce today. This particular Howard is as nice as they get for a twelve size, open face Series Seven, 17 jewel. It sports Breguet style, blued steel, "Lunette" hands (including the second hand), Roman numerals, a porcelain dial, and a wonderfully simple, plain polish case that was the thickest gold-filled case made. The "Extra" designation that you can see on the interior of the case back lets the user know that it is guaranteed to wear permanently. Gold filled cases were rated in terms of years of wear provided. This is a yellow gold filled case that is real classic. Normally, one can see the year designations of 5, 10, 15, 20, and 25 years inscribed on the case but, rarely the term "Extra" which meant it was the thickest amount of gold that could be used while still having the more rigid base metal on the interior of the case. Very, very few of these cases were made, since it was a very costly proposition to produce one. Add to all of this the fact that the case is a "book style, swing-out" case in fantastic condition. We think that this watch was rarely used over its lifetime and you only have to look at the tiny, beaded rim on the case covers to see what we mean. The beading is still beautiful in its simplicity. This may be your chance to own a Howard that is easy to carry in modern clothing, stunning in its appearance, and in fantastic running condition. Remember all of our timepieces come with our famous one-year warranty for parts and labor so that you may buy with confidence.
There were many Swiss pocket watches made but very few that had the good looks of this Coventry Sterling Silver, open face, key-wind and key-set gentleman's watch. It was made circa 1887 and it is still in fantastic condition. Maybe it was only used for special occasions or it was simply lovingly cared for. What ever the reason, it is all the better for us today. The sterling silver case measures 50mm in diameter, by 18mm thick and it looks great. The hinges for the front bezel and rear lid are solid rose gold and the case band (middle) is what we call a coin edge design so that you can grip it quite easily. The back lid opens effortlessly with the push of the button on the pendant revealing the winding hole and the original owner's name, John Carver. This watch was made for the English market and it bears all the correct hallmarks for purity, maker's mark, and date. The watch was made in Coventry by Adam Burdess and it is a high quality, fusee, tip-out, movement which displays the most spectacular silver dial that is adorned with multi-color gold embellishments. Make sure you zoom in on the photos to see how intricate the dial design is. Roman numerals surround the textured dial center where you can see a foliate arrangement in multi-color gold. This is a nice size, gentleman's, key-wind pocket watch that you will be proud to wear and show off. We have only one...don't miss it!
If you are a regular here at the Father Time site you already know that we believe that Hamilton was the best manufacturer in America. Not only were they the best in terms of total quality, they were also very competitive. In the late 1930s and early 1940s, the watch company designers were focused on making slightly larger and longer wristwatches. The rectangular shape was in style and there were many riffs on this theme. This particular Hamilton "Donald" is one of the real classic looks in solid yellow gold that they produced in 1941. Its solid gold case measures 28mm in width by 36mm lug to lug. The silvered dial sports applied gold Arabic numerals, gold "dagger" hands, and a brown lizard band with a 14k solid gold buckle completes the look. The 19 jewel movement is in pristine condition and is winding, setting, and keeping time just as it should. This is the kind of dress watch that you can own for a lifetime...don't miss it!
Longines has been a mover and shaker in the watch world since its inception in Saint-Imier, Switzerland in 1832. Founded by Auguste Agassiz, Longines has been a steady beacon for timekeeping. This watch is representative of their quality and robustness in the market. It was made circa 1972 and executed in brushed stainless steel case, with a charcoal dial and applied stainless steel bar markers at the chapters, and a date window at the 3 o'clock position. The model is the "Conquest" Automatic (self winding) with a central sweep seconds hand. The case measures 37 mm in width by 40 mm lug to lug and we now have it paired with an original brushed stainless steel bracelet (not shown in the photos). The movement is a 25 jewel workhorse that will give you great service for generations to come. This is a model we have never had the privilege to own before, due to its scarcity in the market. What really caught our attention, other than its great looks, is the pristine condition of the case, dial, and movement. This is as nice as it gets... what a handsome watch...and it can be yours. Remember all of our watches come with our famous one-year warranty for parts and labor so that you may buy with confidence.
Hamilton was, without a doubt, the best maker of pocket watches in America and many of their wonderful timepieces are still being used everyday. This particular Hamilton is a scarce configuration in that it is an asymmetrical shaped case that contains a round movement. The case is white gold-filled measuring 44mm tall, by 41mm wide (at its widest), by 21mm (at its narrowest). It is 10mm in thickness. This is a twelve size, open face, 17 jewel, adjusted, nickel movement with a double roller. Now, if you don't know what any of that refers to, just harken to the fact that it is a bit above the average pocket watch in looks, quality, and performance. It has a rigid bow that is very nice, as is the case decoration. The back sports an engraved cartouche ("JC") and the hands are stylized blued steel that complete the Art Deco theme. Made circa 1926, this watch was very much in vogue. It is an elegant gentleman's dress watch that could also be employed for everyday use. Our one-year warranty will allow you to purchase without the worry of restoration.
This is not your ordinary open face pocket watch. It is an American Waltham "Chronometer" rated, fine timepiece. The "Chronometer" designation is reserved for only the top quality watches that are able to pass a stringent set of parameters. Waltham gave it the name "Victoria". The 18 size, yellow gold filled case measures 53mm in diameter (not including the stem and bow) by 18mm thick and was made made circa 1894. It is a 17 jewel, highly precise, nickel plated movement with a safety pinion, a micrometric regulator, marked "adjusted", and with a handsome damascening pattern on the movement plates. The double sunk, porcelain dial exhibits elongated Roman numerals and a red five minute track just on the perimeter of the minute track. There is a seconds bit at the six o'clock position and the original hands are gold, Louis XIV style. The case shows some signs of loving use over the years, but is still very handsome. The case back has an un-engraved shield that awaits your family initials. This is truly a fine timepiece from one of America's finest manufacturers that really deserves the "Chronometer" designation. If you are searching for a really great pocket watch in a large man's size, then this may be the one for you!
Elgin produced watches in Elgin, Illinois (a Chicago suburb), for over 100 years. They were the largest and most prolific of the American manufacturers and everything they turned their hand to was well made and, as a testament to their prowess, there are many Elgins still ticking away, today. This gentleman's Elgin is one of them and what a handsome case and dial configuration it has. This is what we call a "Tonneau" case, due to its shape. It houses a seven jewel movement that our head watchmaker has running like a top. The case is a three-part, yellow gold filled and it measures 28mm, at its widest, by 22mm, at its thinnest, by 37mm lug to lug. The case center shows off some fancy engraving that carries the theme of the engraving on the case front. The silvered dial is very nice and is contrasted by very stylized blued steel hands. It sports a black, lizard band that completes the look. For a watch made circa 1932, it is a real winner. Our one-year warranty for parts and labor will allow you to buy with confidence.